European contribution to the International Space Station

European contribution to the International Space Station

The European contribution to the International Space Station comes from 10 members of the European Space Agency (ESA) and amounts to an 8% share in the programme. It consists of a number of modules (primarily the Columbus laboratory) in the US segment, ATV supply ships, launchers, software and €8 billion.


  • History 1
  • Modules 2
  • ATV 3
  • Launchers 4
  • Research 5
  • Astronauts 6
  • Costs and participating ESA states 7
  • References 8


In the 1980s, ESA devised plans for its own space station called Columbus which would initially be attached to NASA's Space Station Freedom. America objected to ESA's using Columbus as building block of a future European space station, and were concerned that they would facilitate the creation of a potential competitor if the manned space outpost fulfilled its promise as supplier of commercially viable products, such as new materials and pharmaceuticals. Plans were scaled down as a result, and by 1988, Europe proposed to participate with three elements: Attached Pressurized Module, Man Tended Free-Flying platform, plus an unmanned polar remote sensing platform. This would be supported by the Ariane 5 rocket and the Hermes spaceplane (a mini space shuttle). However after German reunification, ESA's budget reductions meant something had to be cancelled.[1][2][3]

The collapse of the Soviet Union and the Space Shuttle Challenger disaster meant a radical change in plans for a space station. The US and Russia decided to cooperate on an International Space Station. ESA cancelled much of its space station programme to focus on the Columbus module, reconfigured for the ISS.[3] The module was approved in 1995 but delays in station construction meant Columbus would not fly until 2008.[4]


Columbus, ESA's largest contribution, attached to the ISS

ESA's largest physical contribution has been the Columbus laboratory, launched in 2008. It is a flexible and extensive scientific research facility planned to last at least 10 years.[5] Columbus was constructed in Italy by Alcatel Alenia Space with functional architecture and software designed by EADS in Germany. Unlike other ESA built modules, Columbus is operated by ESA rather than NASA and is controlled by the Columbus Control Centre in Germany. It cost 1.4 billion (about US$2 billion) on building Columbus, including the experiments that will fly in it and the ground control infrastructure necessary to operate them.[6]

ESA has contributed a further two nodes (Harmony & Tranquility) which connect modules of the station and had docking ports for visiting ships. They were built by ESA in Italy for NASA and launched in 2007 and 2010.[7][8] The Italian Space Agency, in addition and independently from its participation to ESA programs,[9] also built the Multi-Purpose Logistics Module for NASA.[10] Likewise, ESA built the Cupola module for NASA which is used for observing CanadaArm and was launched in 2009.[11] In 2014 the European Robotic Arm will be launched and attached to the Russian segment.[12]

ESA also provides the DMS-R data management system designed for the Russian segment of the ISS. It provides control, naviagtion, mission management and failure management for the Russian segment and is installed on the module Zvezda.[13]


The Jules Verne ATV bringing new supplies to the ISS in 2008

ESA developed the Automated Transfer Vehicle (ATV) as an expendable, unmanned resupply spacecraft to resupply the ISS. It's capable of bringing 6.6 tonnes of supplies to the ISS and docking automatically. As a pressurised component it stays docked as part of the station for several months and boosts it orbit. It is then filled with waste and burnt up in the atmosphere.[14] Three ATVs, Jules Verne, Johannes Kepler and Edoardo Amaldi, have been successfully launched since March 2008. ESA has contracted suppliers to produce two more ATVs to be flown before 2015.[15]

ATV missions are monitored and controlled from the ATV Control Centre (ATV-CC) located at the Toulouse Space Centre (CST) in Toulouse, France. The centre is responsible for all planning and executing of every orbital manoeuvre and mission task of the ATV, from the moment of separation from its launch vehicle, until it burns up in the Earth's atmosphere.[16]

The prime contractor for the ATV is EADS Astrium Space Transportation, leading a consortium of many sub-contractors. Development was started in Les Mureaux, France and moved to Bremen, Germany, as the project moved from its development to production stage of the four initial units starts. In order to facilitate the relationship between the contractor and ESA, an integrated ESA team at the Les Mureaux site has been established for the duration of the development. The development cost of the ATV was approximately €1.35 billion,[17] and each ATV spacecraft costs about US$300 million, not including launch costs.[18]


ESA's Ariane 5 acts as one of the launchers for the ISS components. Guiana Space Centre provides a launch pad for Ariane and Russian Soyuz rockets. All ATV crafts are launched from Ariane rockets at Guiana.


ELIPS is ESA's space research programme on the ISS. Columbus provides ESA's research labs through its 10 payload racks stocked with equipment and external facilities for experiments. ESA run experiments on the ISS include an ultra-stable atomic clock, an Atmosphere-Space Interaction Monitor, an Eye tracking experiment and the Matroshka experiments.


The first ESA astronaut to board the ISS was Umberto Guidoni on a resupply mission. The first ESA astronaut to stay on board in an expedition was Thomas Reiter in 2006. Luca Parmitano is currently serving in Expedition 36.

Astronaut State Flight Expedition/Visitor Year
Umberto Guidoni  Italy STS-100 Visitor 2001
Claudie Haigneré  France Soyuz TM-33 Visitor 2001
Roberto Vittori  Italy Soyuz TM-34 Visitor 2002
Philippe Perrin  France STS-111 Visitor 2002
Frank De Winne  Belgium Soyuz TMA-1 Visitor 2002
Pedro Duque  Spain Soyuz TMA-3 Visitor 2003
André Kuipers  Netherlands Soyuz TMA-4 Visitor 2003
Roberto Vittori  Italy Soyuz TMA-6 Visitor 2005
Thomas Reiter  Germany STS-121 Expedition 13 & Expedition 14 2006
Christer Fuglesang  Sweden STS-116 Visitor 2006
Paolo A. Nespoli  Italy STS-120 Visitor 2007
Hans Schlegel  Germany STS-122 Visitor 2008
Léopold Eyharts  France STS-122 Expedition 14 2008
Frank De Winne  Belgium Soyuz TMA-15 Expedition 20 & Expedition 21 2009
Christer Fuglesang  Sweden STS-128 Visitor 2009
Paolo A. Nespoli  Italy Soyuz TMA-20 Expedition 26 & Expedition 27 2010
André Kuipers  Netherlands Soyuz TMA-03M Visitor 2011
Roberto Vittori  Italy STS-134 Visitor 2011
André Kuipers  Netherlands Soyuz TMA-03M Expedition 30 & Expedition 31 2012
Luca Parmitano  Italy Soyuz TMA-09M Expedition 36 & Expedition 37 2013
Samantha Cristoforetti  Italy Soyuz TMA-15M Expedition 42 & Expedition 43 2014

Costs and participating ESA states

In contributing to the ISS, ESA only represents 10 of its member states: Belgium, Denmark, France, Germany, Italy, Netherlands, Norway, Spain, Sweden and Switzerland. Austria, Finland, and Ireland chose not to participate, because of lack of interest or concerns about the expense of the project. The United Kingdom withdrew from the preliminary agreement because of concerns about the expense of the project. The other states joined ESA after the agreement had been signed.[19] Non-participating ESA states are allowed access to the ISS for a 3 year trial period between 2010 and 2013.[20][21]

The current cost estimates for the ISS are approaching €100 billion in total (development, construction and 10 years of maintaining the station) of which ESA has committed to paying €8 billion.[22] About 90% of the costs of ESA's ISS share will be contributed by Germany (41%), France (28%) and Italy (20%).


  1. ^ "ESA Polar Platform". Retrieved 1 May 2012. 
  2. ^ "Columbus space station module". Retrieved 1 May 2012. 
  3. ^ a b "Marcus Lindroos: Columbus Man-Tended Free Flyer - MTFF". 
  4. ^ From Spacelab to Columbus, ESA
  5. ^ Columbus laboratory, ESA
  6. ^ Harwood, William (February 11, 2008). "Station arm pulls Columbus module from cargo bay".  
  7. ^ Node 2: Connecting Module, ESA
  8. ^ Node 3: Connecting Module, ESA
  9. ^ "ISS Elements: Multi-Purpose Logistics Modules (MPLM)". Space Station User's Guide. Retrieved 7 March 2014. The MPLMs are provided to the ISS program by Italy (independent of Italy's role as a member state of ESA) to NASA and are considered to be U.S. elements. In a bartered exchange for providing these modules, the U.S. has given Italy research time aboard the ISS out of the U.S. allotment in addition to that which Italy receives as a member of ESA. 
  10. ^ Multi-Purpose Logistics Modules, NASA
  11. ^ Cupola, ESA
  12. ^ European Robotic Arm, ESA
  13. ^ DMS-R: ESA's Data Management System for the Russian Segment of the ISS, ESA
  14. ^ Mission concept and the role of ATV, ESA
  15. ^ "Europe launches its first re-supply ship – Jules Verne ATV – to the ISS". 9 March 2008. Retrieved 2011-03-01. 
  16. ^ "ATV Control Centre".  
  17. ^ "Europe sets a course for the ISS". German Aerospace Cente. 25 February 2008. Retrieved 17 August 2011. 
  18. ^ Clark, Stephen (1 December 2009). "Space station partners assess logistics needs beyond 2015". Spaceflight Now. Archived from the original on 4 December 2009. Retrieved 1 December 2009. 
  19. ^ "International Space Station: European Participating States". European Space Agency. 2009. Retrieved 17 January 2009. 
  20. ^ EU mulls opening ISS to more countries, Space Travel 27 October 2010
  21. ^ New ESA Policy Broadens European Access to the International Space Station , Space News 21 October 2010
  22. ^ "International Space Station: How much does it cost?". European Space Agency. 9 August 2005.