Gauss's law
Electromagnetism 

In physics, Gauss's law, also known as Gauss's flux theorem, is a law relating the distribution of electric charge to the resulting electric field.
The law was formulated by Carl Friedrich Gauss in 1835, but was not published until 1867.^{[1]} It is one of the four Maxwell's equations which form the basis of classical electrodynamics, the other three being Gauss's law for magnetism, Faraday's law of induction, and Ampère's law with Maxwell's correction. Gauss's law can be used to derive Coulomb's law,^{[2]} and vice versa.
Contents
 Qualitative description of the law 1

Equation involving E field 2

Integral form 2.1
 Applying the integral form 2.1.1
 Differential form 2.2
 Equivalence of integral and differential forms 2.3

Integral form 2.1

Equation involving D field 3
 Free, bound, and total charge 3.1
 Integral form 3.2
 Differential form 3.3
 Equivalence of total and free charge statements 4
 Equation for linear materials 5

Relation to Coulomb's law 6
 Deriving Gauss's law from Coulomb's law 6.1
 Deriving Coulomb's law from Gauss's law 6.2
 See also 7
 Notes 8
 References 9
 External links 10
Qualitative description of the law
In words, Gauss's law states that:
 The net electric flux through any closed surface is equal to ^{1}⁄_{ε} times the net electric charge enclosed within that closed surface.^{[3]}
Gauss's law has a close mathematical similarity with a number of laws in other areas of physics, such as Gauss's law for magnetism and Gauss's law for gravity. In fact, any "inversesquare law" can be formulated in a way similar to Gauss's law: For example, Gauss's law itself is essentially equivalent to the inversesquare Coulomb's law, and Gauss's law for gravity is essentially equivalent to the inversesquare Newton's law of gravity.
Gauss's law is something of an electrical analogue of Ampère's law, which deals with magnetism.
The law can be expressed mathematically using vector calculus in integral form and differential form, both are equivalent since they are related by the divergence theorem, also called Gauss's theorem. Each of these forms in turn can also be expressed two ways: In terms of a relation between the electric field E and the total electric charge, or in terms of the electric displacement field D and the free electric charge.^{[4]}
Equation involving E field
Gauss's law can be stated using either the electric field E or the electric displacement field D. This section shows some of the forms with E; the form with D is below, as are other forms with E.
Integral form
Gauss's law may be expressed as:^{[5]}
 \Phi_E = \frac{Q}{\varepsilon_0}
where Φ_{E} is the electric flux through a closed surface S enclosing any volume V, Q is the total charge enclosed within S, and ε_{0} is the electric constant. The electric flux Φ_{E} is defined as a surface integral of the electric field:
where E is the electric field, dA is a vector representing an infinitesimal element of area,^{[note 1]} and · represents the dot product of two vectors.
Since the flux is defined as an integral of the electric field, this expression of Gauss's law is called the integral form.
Applying the integral form
If the electric field is known everywhere, Gauss's law makes it quite easy, in principle, to find the distribution of electric charge: The charge in any given region can be deduced by integrating the electric field to find the flux.
However, much more often, it is the reverse problem that needs to be solved: The electric charge distribution is known, and the electric field needs to be computed. This is much more difficult, since if you know the total flux through a given surface, that gives almost no information about the electric field, which (for all you know) could go in and out of the surface in arbitrarily complicated patterns.
An exception is if there is some symmetry in the situation, which mandates that the electric field passes through the surface in a uniform way. Then, if the total flux is known, the field itself can be deduced at every point. Common examples of symmetries which lend themselves to Gauss's law include cylindrical symmetry, planar symmetry, and spherical symmetry. See the article Gaussian surface for examples where these symmetries are exploited to compute electric fields.
Differential form
By the divergence theorem Gauss's law can alternatively be written in the differential form:
 \nabla \cdot \mathbf{E} = \frac{\rho}{\varepsilon_0}
where ∇ · E is the divergence of the electric field, ε_{0} is the electric constant, and ρ is the total electric charge density.
Equivalence of integral and differential forms
The integral and differential forms are mathematically equivalent, by the divergence theorem. Here is the argument more specifically.
Equation involving D field
Free, bound, and total charge
The electric charge that arises in the simplest textbook situations would be classified as "free charge"—for example, the charge which is transferred in static electricity, or the charge on a capacitor plate. In contrast, "bound charge" arises only in the context of dielectric (polarizable) materials. (All materials are polarizable to some extent.) When such materials are placed in an external electric field, the electrons remain bound to their respective atoms, but shift a microscopic distance in response to the field, so that they're more on one side of the atom than the other. All these microscopic displacements add up to give a macroscopic net charge distribution, and this constitutes the "bound charge".
Although microscopically, all charge is fundamentally the same, there are often practical reasons for wanting to treat bound charge differently from free charge. The result is that the more "fundamental" Gauss's law, in terms of E (above), is sometimes put into the equivalent form below, which is in terms of D and the free charge only.
Integral form
This formulation of Gauss's law states the total charge form:
 \Phi_D = Q_\text{free}\!
where Φ_{D} is the Dfield flux through a surface S which encloses a volume V, and Q_{free} is the free charge contained in V. The flux Φ_{D} is defined analogously to the flux Φ_{E} of the electric field E through S:
Differential form
The differential form of Gauss's law, involving free charge only, states:
 \mathbf{\nabla} \cdot \mathbf{D} = \rho_\text{free}
where ∇ · D is the divergence of the electric displacement field, and ρ_{free} is the free electric charge density.
Equivalence of total and free charge statements
Equation for linear materials
In homogeneous, isotropic, nondispersive, linear materials, there is a simple relationship between E and D:
 \mathbf{D} = \varepsilon \mathbf{E}
where ε is the permittivity of the material. For the case of vacuum (aka free space), ε = ε_{0}. Under these circumstances, Gauss's law modifies to
 \Phi_E = \frac{Q_\text{free}}{\varepsilon}
for the integral form, and
 \mathbf{\nabla} \cdot \mathbf{E} = \frac{\rho_\text{free}}{\varepsilon}
for the differential form.
Relation to Coulomb's law
Deriving Gauss's law from Coulomb's law
Gauss's law can be derived from Coulomb's law.
Note that since Coulomb's law only applies to stationary charges, there is no reason to expect Gauss's law to hold for moving charges based on this derivation alone. In fact, Gauss's law does hold for moving charges, and in this respect Gauss's law is more general than Coulomb's law.
Deriving Coulomb's law from Gauss's law
Strictly speaking, Coulomb's law cannot be derived from Gauss's law alone, since Gauss's law does not give any information regarding the curl of E (see Helmholtz decomposition and Faraday's law). However, Coulomb's law can be proven from Gauss's law if it is assumed, in addition, that the electric field from a point charge is sphericallysymmetric (this assumption, like Coulomb's law itself, is exactly true if the charge is stationary, and approximately true if the charge is in motion).
See also
Notes
References
 ^ Bellone, Enrico (1980). A World on Paper: Studies on the Second Scientific Revolution.
 ^ Halliday, David; Resnick, Robert (1970). Fundamentals of Physics. John Wiley & Sons, Inc. pp. 452–53.
 ^ Serway, Raymond A. (1996). Physics for Scientists and Engineers with Modern Physics, 4th edition. p. 687.
 ^ I.S. Grant, W.R. Phillips (2008). Electromagnetism (2nd ed.). Manchester Physics, John Wiley & Sons.
 ^ I.S. Grant, W.R. Phillips (2008). Electromagnetism (2nd ed.). Manchester Physics, John Wiley & Sons.
 ^ Matthews, Paul (1998). Vector Calculus. Springer.
 ^ See, for example, Griffiths, David J. (1998). Introduction to Electrodynamics (3rd ed.). Prentice Hall. p. 50.
Jackson, John David (1999). Classical Electrodynamics, 3rd ed., New York: Wiley. ISBN 047130932X.
External links
 MIT Video Lecture Series (30 x 50 minute lectures) Electricity and Magnetism Taught by Professor Walter Lewin.
 section on Gauss's law in an online textbook
 Gauss's Law for Spherical Symmetry MISN0132 (PDF file) by Peter Signell for Project PHYSNET.
 Gauss's Law Applied to Cylindrical and Planar Charge Distributions MISN0133 (PDF file) by Peter Signell for Project PHYSNET.