Orbital maneuver
In spaceflight, an orbital maneuver is the use of propulsion systems to change the orbit of a spacecraft. For spacecraft far from Earth (for example those in orbits around the Sun) an orbital maneuver is called a deepspace maneuver (DSM).
The rest of the flight, especially in a transfer orbit, is called coasting.
Contents

General 1
 Rocket equation 1.1
 Deltav 1.2
 Deltav budget 1.3
 Impulsive maneuvers 1.4
 Applying a low thrust over a longer period of time 1.5

Assists 1.6
 Oberth effect 1.6.1
 Gravitational assist 1.6.2

Transfer orbits 2
 Hohmann transfer 2.1
 Bielliptic transfer 2.2
 Low energy transfer 2.3
 Orbital inclination change 2.4
 Constant Thrust Trajectory 2.5

Rendezvous and docking 3
 Orbit phasing 3.1
 Space rendezvous and docking 3.2
 See also 4
 References 5
 External links 6
General
Rocket equation
The Tsiolkovsky rocket equation, or ideal rocket equation is an equation that is useful for considering vehicles that follow the basic principle of a rocket: where a device that can apply acceleration to itself (a thrust) by expelling part of its mass with high speed and moving due to the conservation of momentum. Specifically, it is a mathematical equation that relates the deltav (the maximum change of speed of the rocket if no other external forces act) with the effective exhaust velocity and the initial and final mass of a rocket (or other reaction engine.)
For any such maneuver (or journey involving a number of such maneuvers):
 \Delta v = v_\text{e} \ln \frac {m_0} {m_1}
where:
 m_0 is the initial total mass, including propellant,
 m_1 is the final total mass,
 v_\text{e} is the effective exhaust velocity (v_\text{e} = I_\text{sp} \cdot g_0 where I_\text{sp} is the specific impulse expressed as a time period and g_0 is the gravitational constant),
 \Delta v\ is deltav  the maximum change of speed of the vehicle (with no external forces acting).
Deltav
The applied change in speed of each maneuver is referred to as deltav (\Delta\mathbf{v}\,).
Deltav budget
The total deltav for all and each maneuver is estimated for a mission and is called a deltav budget. With a good approximation of the deltav budget designers can estimate the fuel to payload requirements of the spacecraft using the rocket equation.
Impulsive maneuvers
An "impulsive maneuver" is the mathematical model of a maneuver as an instantaneous change in the spacecraft's velocity (magnitude and/or direction) as illustrated in figure 1. In the physical world no truly instantaneous change in velocity is possible as this would require an "infinite force" applied during an "infinitely short time" but as a mathematical model it in most cases describes the effect of a maneuver on the orbit very well. The offset of the velocity vector after the end of real burn from the velocity vector at the same time resulting from the theoretical impulsive maneuver is only caused by the difference in gravitational force along the two paths (red and black in figure 1) which in general is small.
In the planning phase of space missions designers will first approximate their intended orbital changes using impulsive maneuvers that greatly reduces the complexity of finding the correct orbital transitions.
Applying a low thrust over a longer period of time
Applying a low thrust over a longer period of time is referred to as a nonimpulsive maneuver (where 'nonimpulsive' refers to the maneuver not being of a short time period rather than not involving impulse change in momentum, which clearly must take place).
Another term is finite burn, where the word "finite" is used to mean "nonzero", or practically, again: over a longer period.
For a few space missions, such as those including a space rendezvous, high fidelity models of the trajectories are required to meet the mission goals. Calculating a "finite" burn requires a detailed model of the spacecraft and its thrusters. The most important of details include: mass, center of mass, moment of inertia, thruster positions, thrust vectors, thrust curves, specific impulse, thrust centroid offsets, and fuel consumption.
Assists
Oberth effect
In astronautics, the Oberth effect is where the use of a rocket engine when travelling at high speed generates much more useful energy than one at low speed. Oberth effect occurs because the propellant has more usable energy (due to its kinetic energy on top of its chemical potential energy) and it turns out that the vehicle is able to employ this kinetic energy to generate more mechanical power. It is named after Hermann Oberth, the AustroHungarianborn, German physicist and a founder of modern rocketry, who apparently first described the effect.^{[1]}
Oberth effect is used in a powered flyby or Oberth maneuver where the application of an impulse, typically from the use of a rocket engine, close to a gravitational body (where the gravity potential is low, and the speed is high) can give much more change in kinetic energy and final speed (i.e. higher specific energy) than the same impulse applied further from the body for the same initial orbit. For the Oberth effect to be most effective, the vehicle must be able to generate as much impulse as possible at the lowest possible altitude; thus the Oberth effect is often far less useful for lowthrust reaction engines such as ion drives, which have a low propellant flow rate.
Oberth effect also can be used to understand the behaviour of multistage rockets; the upper stage can generate much more usable kinetic energy than might be expected from simply considering the chemical energy of the propellants it carries.
Historically, a lack of understanding of this effect led early investigators to conclude that interplanetary travel would require completely impractical amounts of propellant, as without it, enormous amounts of energy are needed.^{[1]}
Gravitational assist
In orbital mechanics and aerospace engineering, a gravitational slingshot, gravity assist maneuver, or swingby is the use of the relative movement and gravity of a planet or other celestial body to alter the path and speed of a spacecraft, typically in order to save propellant, time, and expense. Gravity assistance can be used to accelerate, decelerate and/or redirect the path of a spacecraft.
The "assist" is provided by the motion (orbital angular momentum) of the gravitating body as it pulls on the spacecraft.^{[2]} The technique was first proposed as a midcourse manoeuvre in 1961, and used by interplanetary probes from Mariner 10 onwards, including the two Voyager probes' notable flybys of Jupiter and Saturn.
Transfer orbits
Orbit insertion is a general term for a maneuver that is more than a small correction. It may be used for a maneuver to change a transfer orbit or an ascent orbit into a stable one, but also to change a stable orbit into a descent: descent orbit insertion. Also the term orbit injection is used, especially for changing a stable orbit into a transfer orbit, e.g. translunar injection (TLI), transMars injection (TMI) and transEarth injection (TEI).
Hohmann transfer
In orbital mechanics, the Hohmann transfer orbit is an elliptical orbit used to transfer between two circular orbits of different altitudes, in the same plane.
The orbital maneuver to perform the Hohmann transfer uses two engine impulses which move a spacecraft onto and off the transfer orbit. This maneuver was named after Walter Hohmann, the German scientist who published a description of it in his 1925 book Die Erreichbarkeit der Himmelskörper (The Accessibility of Celestial Bodies).^{[3]} Hohmann was influenced in part by the German science fiction author Kurd Laßwitz and his 1897 book Two Planets.
Bielliptic transfer
In astronautics and aerospace engineering, the bielliptic transfer is an orbital maneuver that moves a spacecraft from one orbit to another and may, in certain situations, require less deltav than a Hohmann transfer maneuver.
The bielliptic transfer consists of two half elliptic orbits. From the initial orbit, a deltav is applied boosting the spacecraft into the first transfer orbit with an apoapsis at some point r_b away from the central body. At this point, a second deltav is applied sending the spacecraft into the second elliptical orbit with periapsis at the radius of the final desired orbit, where a third deltav is performed, injecting the spacecraft into the desired orbit.
While they require one more engine burn than a Hohmann transfer and generally requires a greater travel time, some bielliptic transfers require a lower amount of total deltav than a Hohmann transfer when the ratio of final to initial semimajor axis is 11.94 or greater, depending on the intermediate semimajor axis chosen.^{[4]}
The idea of the bielliptical transfer trajectory was first published by Ary Sternfeld in 1934.^{[5]}
Low energy transfer
A low energy transfer, or low energy trajectory, is a route in space which allows spacecraft to change orbits using very little fuel.^{[6]}^{[7]} These routes work in the EarthMoon system and also in other systems, such as traveling between the satellites of Jupiter. The drawback of such trajectories is that they take much longer to complete than higher energy (more fuel) transfers such as Hohmann transfer orbits.
Low energy transfer are also known as weak stability boundary trajectories, or ballistic capture trajectories.
Low energy transfers follow special pathways in space, sometimes referred to as the Interplanetary Transport Network. Following these pathways allows for long distances to be traversed for little expenditure of deltav.
Orbital inclination change
Orbital inclination change is an orbital maneuver aimed at changing the inclination of an orbiting body's orbit. This maneuver is also known as an orbital plane change as the plane of the orbit is tipped. This maneuver requires a change in the orbital velocity vector (delta v) at the orbital nodes (i.e. the point where the initial and desired orbits intersect, the line of orbital nodes is defined by the intersection of the two orbital planes).
In general, inclination changes can require a great deal of deltav to perform, and most mission planners try to avoid them whenever possible to conserve fuel. This is typically achieved by launching a spacecraft directly into the desired inclination, or as close to it as possible so as to minimize any inclination change required over the duration of the spacecraft life.
Maximum efficiency of inclination change is achieved at apoapsis, (or apogee), where orbital velocity v\, is the lowest. In some cases, it may require less total delta v to raise the satellite into a higher orbit, change the orbit plane at the higher apogee, and then lower the satellite to its original altitude.^{[8]}
Constant Thrust Trajectory
Constantthrust and constantacceleration trajectories involve the spacecraft firing its engine in a prolonged constant burn. In the limiting case where the vehicle acceleration is high compared to the local gravitational acceleration, the spacecraft points straight toward the target (accounting for target motion), and remains accelerating constantly under high thrust until it reaches its target. In this highthrust case, the trajectory approaches a straight line. If it is required that the spacecraft rendezvous with the target, rather than performing a flyby, then the spacecraft must flip its orientation halfway through the journey, and decelerate the rest of the way.
In the constantthrust trajectory,^{[9]} the vehicle's acceleration increases during thrusting period, since the fuel use means the vehicle mass decreases. If, instead of constant thrust, the vehicle has constant acceleration, the engine thrust must decrease during the trajectory.
This trajectory requires that the spacecraft maintain a high acceleration for long durations. For interplanetary transfers, days, weeks or months of constant thrusting may be required. As a result, there are no currently available spacecraft propulsion systems capable of using this trajectory. It has been suggested that some forms of nuclear (fission or fusion based) or antimatter powered rockets would be capable of this trajectory.
Rendezvous and docking
Orbit phasing
In astrodynamics orbit phasing is the adjustment of the timeposition of spacecraft along its orbit, usually described as adjusting the orbiting spacecraft's true anomaly.
Space rendezvous and docking
A space rendezvous is an orbital maneuver during which two spacecraft, one of which is often a space station, arrive at the same orbit and approach to a very close distance (e.g. within visual contact). Rendezvous requires a precise match of the orbital velocities of the two spacecraft, allowing them to remain at a constant distance through orbital stationkeeping. Rendezvous may or may not be followed by docking or berthing, procedures which bring the spacecraft into physical contact and create a link between them.
See also
References
 ^ ^{a} ^{b} NASATTF622: Ways to spaceflight p 200  Herman Oberth
 ^ http://www2.jpl.nasa.gov/basics/bsf41.php Basics of Space Flight, Sec. 1 Ch. 4, NASA Jet Propulsion Laboratory
 ^ Walter Hohmann, The Attainability of Heavenly Bodies (Washington: NASA Technical Translation F44, 1960) Internet Archive.
 ^ Vallado, David Anthony (2001). Fundamentals of Astrodynamics and Applications. Springer. p. 317.
 ^ Sternfeld A., Sur les trajectoires permettant d'approcher d'un corps attractif central à partir d'une orbite keplérienne donnée.  Comptes rendus de l'Académie des sciences (Paris), vol. 198, pp. 711  713.
 ^
 ^
 ^ Braeunig, Robert A. "Basics of Space Flight: Orbital Mechanics".
 ^ W. E. Moeckel, Trajectories with Constant Tangential Thrust in Central Gravitational Fields, Technical Report R63, NASA Lewis Research Center, 1960 (accessed 26 March 2014)
External links
 Handbook Automated Rendezvous and Docking of Spacecraft by Wigbert Fehse

 All articles with unsourced statements
 Articles with unsourced statements from September 2011
 Articles with unsourced statements from December 2011
 Articles with unsourced statements from November 2011
 Use American English from January 2014
 All WorldHeritage articles written in American English
 Astrodynamics
 Orbital maneuvers