Tabun (nerve agent)
GA; Ethyl dimethylphosphoramidocyanidate; Dimethylaminoethoxy-cyanophosphine oxide; Dimethylamidoethoxyphosphoryl cyanide; Ethyl dimethylaminocyanophosphonate; Ethyl ester of dimethylphosphoroamidocyanidic acid; Ethyl phosphorodimethylamidocyanidate; Cyanodimethylaminoethoxyphosphine oxide; Dimethylaminoethodycyanophosphine oxide; EA1205
|Molar mass||162.13 g·mol−1|
|Appearance||Colorless to brown liquid|
1.0887 g/cm3 at 25 °C
1.102 g/cm3 at 20 °C
|Melting point||−50 °C (−58 °F; 223 K)|
|Boiling point||247.5 °C (477.5 °F; 520.7 K)|
9.8 g/100 g at 25 °C
7.2 g/100 g at 20 °C
|Vapor pressure||0.07 mmHg (9 Pa)|
|Main hazards||Highly Toxic. Fires involving this chemical may result in the formation of hydrogen cyanide|
|Flash point||78 °C (172 °F; 351 K)|
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
Tabun or GA is an extremely toxic chemical substance. It is a clear, colorless, and tasteless liquid with a faint fruity odor. It is classified as a nerve agent because it fatally interferes with normal functioning of the mammalian nervous system. Its production is strictly controlled and stockpiling outlawed by the Chemical Weapons Convention of 1993. Tabun is the first of the G-series nerve agents along with GB (sarin), GD (soman) and GF (cyclosarin).
Tabun was made on an industrial scale by Germany during World War II, based on a process developed by Gerhard Schrader. In the chemical agent factory in Dyhernfurth an der Oder, codenamed "Hochwerk", at least 12,000 metric tons of this agent were manufactured between 1942 and 1945. The manufacturing process consisted of two steps, the first being reaction of gaseous dimethylamine (1) with an excess of phosphoryl chloride (2), yielding dimethylamidophosphoric dichloride (3, codenamed "Produkt 39" or "D 4") and dimethylammonium chloride (4). The dimethylamidophosphoric dichloride thus obtained was purified by vacuum distillation and thereafter transferred to the main Tabun production line. Here it was reacted with an excess of sodium cyanide (5), dispersed in dry chlorobenzene, yielding the intermediate dimethylamidophosphoric dicyanide (not depicted in the scheme) and sodium chloride (8); then, absolute ethanol (6) was added, reacting with the dimethylamidophosphoric dicyanide to yield tabun (7) and hydrogen cyanide (9). After the reaction, the mixture (consisting of about 75% chlorobenzene and 25% tabun, along with insoluble salts and the rest of the hydrogen cyanide) was filtered to remove the insoluble salts and vacuum-distilled to remove hydrogen cyanide and excess chlorobenzene, so yielding the technical product, consisting either of 95% tabun with 5% chlorobenzene (Tabun A) or (later in the war) of 80% tabun with 20% chlorobenzene (Tabun B).
Effects of overexposure
The symptoms of exposure include: nervousness/restlessness, miosis (contraction of the pupil), rhinorrhea (runny nose), excessive salivation, dyspnea (difficulty in breathing due to bronchoconstriction/secretions), sweating, bradycardia (slow heartbeat), loss of consciousness, convulsions, flaccid paralysis, loss of bladder and bowel control, apnea (breathing stopped) and lung blisters. The exact symptoms of overexposure are similar to those created by all nerve agents. Tabun is toxic even in minute doses. The number and severity of symptoms which appear vary according to the amount of the agent absorbed and rate of entry of it into the body. Very small skin dosages sometimes cause local sweating and tremors accompanied with characteristically constricted pupils with few other effects. Tabun is about half as toxic as sarin by inhalation, but in very low concentrations it is more irritating to the eyes than sarin. Also, tabun breaks down slowly, which after repeated exposure can lead to build up in the body.
The effects of tabun appear slowly when tabun is absorbed through the skin rather than inhaled. A victim may absorb a lethal dose quickly, although death may be delayed for one to two hours. A person's clothing can release the toxic chemical for up to 30 minutes after exposure. Inhaled lethal dosages kill in one to ten minutes, and liquid absorbed through the eyes kills almost as fast. However, people who experience mild to moderate exposure to tabun can recover completely, if treated almost as soon as exposure occurs. The LCt50 for tabun is about 400 mg-min/m3.
Treatment for suspected tabun poisoning is often three injections of a nerve agent antidote, such as atropine. Pralidoxime chloride (2-PAM Cl) also works as an antidote; however, it must be administered within minutes to a few hours following exposure to be effective.
Tabun was the first nerve agent known, a property of this chemical discovered by accident in January 1936 by the insecticide for IG Farben, a German chemical and pharmaceutical industry conglomerate, at Elberfeld. He discovered that tabun, as well as being a potent insecticide, was enormously toxic to humans.
During  The reason for the delay was the extreme precautions used by the plant. Intermediate products of tabun were corrosive, and had to be contained in quartz or silver-lined vessels. Tabun itself was also highly toxic, and final reactions were conducted behind double glass walls. Large scale manufacturing of the agent resulted in problems with tabun's degradation over time, and only around 12,500 tons of material were manufactured before the plant was seized by the Soviet Army. The plant initially produced shells and aerial bombs using a 95:5 mix of tabun and chlorobenzene, designated "Variant A", and in the latter half of the war switched to "Variant B", an 80:20 mix of tabun and chlorobenzene designed for easier dispersion. The Soviets dismantled the plant and shipped it to Russia.
During the Nuremberg Trials, Albert Speer, Minister of Armaments and War Production for the Third Reich, testified that he had planned to kill Adolf Hitler in early 1945 by introducing tabun into the Führerbunker ventilation shaft. He said his efforts were frustrated by the impracticality of tabun and his lack of ready access to a replacement nerve agent, and also by the unexpected construction of a tall chimney that put the air intake out of reach.
The US once had a tabun production program, which ended many decades ago. Like the other Allied governments, the Soviets soon abandoned GA for GB and GD. Large quantities of the German-manufactured agent were dumped into the sea to neutralize the substance.
Since GA is much easier to produce than the other G-series weapons and the process is comparatively widely understood, countries that develop a nerve agent capability but lack advanced industrial facilities often start by producing GA.
During the Iran–Iraq War, Iraq employed quantities of chemical weapons against Iranian ground forces. Although the most commonly used agents were mustard gas and sarin, tabun and cyclosarin were also used.
- Cyclosarin (GF)
- Deseret Chemical Depot - location of remaining US stockpile
- Nerve agent
- Sarin (GB)
- Soman (GD)
- Facts About Tabun, National Terror Alert Response System
- Lohs, KH: Synthetische Gifte. 3., überarb. u. erg. Aufl., 1967, Deutscher Militärverlag, Berlin (East).
- Emergency Response Safety and Health Database. TABUN (GA): Nerve Agent. National Institute for Occupatinal Safety and Health. Accessed April 30, 2009.
- Chemical Warfare Weapons Fact Sheets, about.com
- Chemical Weapons: Nerve Agents, University of Washington
- Speer 1970, pp. 430–31.
- . Republished in paperback in 1997 by Simon & Schuster, ISBN 978-0-684-82949-4
- (Original German edition: )
- United States Senate, 103d Congress, 2d Session. (May 25, 1994). Material Safety Data Sheet—Lethal Nerve Agent Tabun (GA). Retrieved Nov. 6, 2004.
- United States Central Intelligence Agency (Jul. 15, 1996) Stability of Iraq's Chemical Weapon Stockpile